Cleanroom Products
Cleanroom Wipes
Cleanroom Papers

BOWIE DICK TEST PACK

Bowie Dick Test Pack (Model: BD-TP)

A Bowie-Dick Test Pack designed for daily monitoring of pre-vacuum steam sterilizer. Check for air removal and leak, inadequate steam penetration and vacuum pump failures bypurple to green ink technology, Conforms to ISO 11140-1 & ISO 11140-4 Class 2.

Typical Causes Of Failure

  • Vacuum pump failures
  • Low steam or water pressure
  • Inadequate air removal or air leak
  • For cleanroom and non-cleanroom use.
  • Clogged drain line or control valves

Quick and Easy with Pull-Flap

  • Easy to open and to pull up without touching the reactive sheet
  • Easy notation with traceability data on permanent color changed sheet

Helix Test Indicator (Model: H-C)

Process Challenge Device (PCD) for pre-vacuum steam sterilization of hollow loads of operating at 134 ℃ for 3.5 minutes or longer. Check for air removal, deep vacuum achievement, steam penetration and exposure levels in lumens and porous items by purple to green ink technology, Conforms to ISO 11140-1 Class 6, EN 867-5.

  • Easy check with compace PCD kit
  • More than 500 uses
  • Compact and reusable PCD with 1.5m tube inside is convenient to check for small setrilizer and each basket.

Riken Bowie-Dick Test Pack is designed as an environmentally safe lead free method for daily monitoring of pre-vacuum steam sterilizers to detect air leaks, inadequate steam penetration and vacuum pump failures. Riken Bowie-Dick Test Pack is designed to simulate a standard towel pack for detecting temperature drops and the presence of air. The test pack is placed in the sterilizer in the most difficult to sterilizing area and run through a sterilization cycle for 16.9 minutes at 121℃. A test pack consists of several blotter sheets, and a test sheet packaged in a silver set. The correctly assembled test pack simulates the resistance of a Bowie-Dick test pack.

Performance Characteristics:

If no appreciable air is present in the sterilizer chamber after vacuums are drawn, the steam will penetrate to the middle of the test pack and turn the indicator sheet a uniform green color. If a small amount of air is present, sufficient to cause a two-degree temperature drop in a Bowie-Dick towel pack, the air will migrate to the middle of the test pack turning the center of the sheet as indicated by a Bordeaux red color rather than a uniform green.

Color Change :to Green for complete change and no air leak .

Complete Color Change Time: 16.9 minutes at 121℃with no air leaks

Indicator Stability: Excellent Before and After Sterilization

Physical Characteristics:

Indicator Printing : One Kent paper sheet on one side.

Dimensions: 12cm × 12cm

Quantity / Set : 1

Sets / Case: 20

Selling Unit: Case

Environmental Conditions:

Storage: 10°-40℃(50°-100°F) at 10-70% humidity

Shelf Life: The expiry date is printed on the product packaging case.

Standards Classification: ISO 11140-1, Class 2 ISO 11140-4

Sticky Mat Sticky Mat Sticky Mat

MORE PRODUCTS

<%-- --%> <%-- --%>